Casting marked out, drilled and counter-bored for M6x1 socket head cap screws.
Other side of casting.
Holding up casting where it is going to be mounted.
Roughly squared to bed and clamped ready to drill and tap bottom hole.
Bottom hole has screw fitted and tightened so that front edge of casting is square to bed. The second hole was then drilled and tapped and the second screw fitted.
Checking that it is square to table on the side.
The digital scale is temporarily fitted. When initially working out how I was going to mount the scale I shortened the scale by 20mm at the top end.
Patterns and castings for the next step.
This should be a new window, minimise or close it to return to Home Page or press