 |
Z CLIP:
Z Clips are placed between the beam and a
board shelf to restrain movement of the shelf. |
 |
POST PROTECTOR - CORNER TYPE:
(450mm High): Post
protectors guard the racking from minor impacts. This corner type is
commonly used on frames that are on the end of the run, and therefore at
greater risk from impact at a number of angles. |
 |
POST PROTECTOR - ANGLE TYPE:
(1000mm High) Post
protectors guard the racking from minor impacts. This type is manufactured
from 75x75 angle. |
 |
POST PROTECTOR - POST TYPE:
(914mm High) Post
protectors guard the racking from minor impacts. This type is manufactured
from a length of post coupled with a special small stand-off. |
 |
SHELF BOARD SUPPORT BAR:
(850 FD, 1050 FD, 1220 FD)
board support bars span between two beams to support board used for a
shelf level. |
 |
PALLET SUPPORT BAR:
(850 FD, 1050 FD, 1220 FD) Pallet
support bars span between two beams to support unusually sized pallets. |
 |
FORK CLEARANCE BAR:
(850 FD, 1050 FD, 1220 FD) Fork
clearance bars span between two beams to support unpalletised loads. |
 |
J LOCK:
J Locks clip into posts to hold spindle pipe
used in cable racking. |
 |
STAND OFF SPACER:
(900mm) Stand off spacers connect a
frame to single post. Note - the stand off length indicates the
measurement from one post face to the next. |
 |
ROW SPACER - BRACING TYPE (WALL TIE):
(380mm, 450mm,
600mm) Row spacers tie two frames together. This type can also be used as
a wall tie. |
 |
ROW SPACER - TUBULAR:
(380mm, 450mm, 600mm) Row
spacers tie two frames together. This type can be used on STD, BFS, and
Longspan frames. |
 |
SPRING CLIP - NEW STYLE:
Spring clips ensure beams do
not unclip as a result of upward vertical impacts. |
 |
FOOTPLATE STD TYPE:
(136x98.5x3) Standard footplates
are used on most applications. |
 |
FOOTPLATE HD TYPE:
(130x100x5) Heavy Duty type
footplates are used when frame loads are expected to be over 7000kg. |
 |
FOOTPLATE BRKT TYPE:
(130x100x5) Bracket type
footplates are used when extra rigidity is required. For example - if a
frame system's height to depth ratio is greater than 6:1. |
 |
SPLICE KIT STD:
Splice kits connect two posts end to
end, and include all hardware required. |
 |
SPACER:
41mm: Spacers keep the rear flange of the
post section square in the construction of frames, splice kits, and
stand-offs. |
 |
SWL SIGN CORFLUTE:
(600mmx300mm) Safe Working Load
signs are required if racking installations are - higher than 4.5 m, cover
a floor area greater than 300m2, or have a unit load larger than 1020 kg. |
`
