 |
VIPER CRUISER BASIC KITIf
you are on a budget, the Viper Cruiser 2 Basic kit is
designed for you. It contains everything you need to get a hovercraft up and
going, except for fuel, timber and paint.
The kit is divided into three stages, and
each stage is available separately.
Stage 1. Contains all the
components and materials to build the hull, such as the fibreglass, resins,
foam, etc (plywood and paint is optional).
Stage 2. Contains all
the components to fit-out the hull, such as the steering, fuel system,
electrical system, skirt, etc.
Stage 3. Contains all the power
module
components, such as the engine, fan, duct, rudders, etc.
|
Stage 1 plus timber and
plywood
|
|
STAGE ONE |
STAGE TWO |
STAGE THREE |
|
$1,550.00au
(Ex GST) |
$2,950.00au (Ex GST) |
$11,500.00au (Ex GST) |
Consists of :
- Epoxy resin.
- Epoxy glue.
- Epoxy wood sealer.
- 150m Fibreglass
tape
- Woven
cloth
- Kevlar cloth
- Filler
powder
- Polyurethane expanding
foam
- Rigid PVC
foam
- Skirt hooks
-
Pre-assembly screws
- Fibreglass Air
deflector
-
Fibreglass engine bay floor supports
- Decals
|
Consists of:
- Skirt material,
Skirt link and securing system
- Steering system (less
rudders)
- Throttle
system
-
Fuel system:
- 35L fibreglass fuel tank
- Fuel line, fuel filter and primer bulb
- External vent and hose
-
Seat foam and covers
- Assorted fittings, seals, screws, bungs,
cleats, etc.
- Electrical system:
- Wiring kit
- Key switch
- Tachometer
- Voltmeter
- Strobe light
- Waterproof switch
- Kill switch
- Fuses
- Fibreglass
windscreen
|
Consists of:
- Rota 582:
- Twin carbs
- Twin ignition
- Fuel pump
- Regulator/ rectifier
- Cable choke
- Electric starter
- Enclosed
air-cleaner system
- Exhaust system & mounts
- Engine
frame
- Light weight
Flex-hub Drive system
- Multi-wing 5Z fan
- One piece,
aero dynamic fan duct assembly
- Fan
guard and fittings
- Rudder kit
- Engine module
mounting kit
Solenoid, battery and cables
-
Assembly instructions
- Solenoid, battery and
battery cables.
|
OPTIONAL:
-
Timber and Plywood
- Two pack
Undercoat and Polyurethane top coat
|
OPTIONAL:
- Fuel gauge and
sender
- Hour meter
- Fire extinguisher
- Gunwale rubber
kit
- Fluted rubber
matting
|
OPTIONAL:
- Fibreglass
engine cover
Engine frame and exhaust coating
Elevator system and cable
Flow straighteners
- Engine frame and exhaust
coating.
- Elevator assembly and cable
|
|
