Toppy Docs

Topfield PVR Error Codes

Updated 24/Dec/2006       

Shutdown message after crash/lockup   
....  Clearing memory.
 
Normal Firmware update/backup messages   
ot##  OTA downloading in progress.
dn##  UART downloading in progress.
AP##  Writing the firmware to flash memory.
Fd##  Writing the channel data to flash memory.
Ed##  Writing the EEPROM data.
AU##  Reading firmware from flash memory.
End  Download/Upload finished successfully.

               ## Indicates quantity of remaining data blocks.

 
Normal Settings update/backup messages   
CP##  Writing settings to flash memory.
EP##  Writing settings to EEPROM.
CP##  Reading settings from flash memory.
EP##  Reading settings from EEPROM.
End  Download/Upload finished successfully.

               ## Indicates quantity of remaining data blocks.

 
Firmware update error messages   
E-01  Data error in downloaded data (corrupted data).
E-02  Corrupted firmware in flash memory.
E-03  Communication error via UART.
E-04  Error in writing flash memory.
E-05  Downloaded data to big for flash memory.
E-06  Error in system ID. Firmware incompatible with receiver.
E-07  Error in system ID. Firmware incompatible with receiver.
E-08  Error in downloaded data format.
E-09  Error in Reading EEPROM.
E-10  Error in Writing EEPROM.
E-11  Unsupported flash memory.
E-12  ???
E-13  Timeout error via OTA.
E-14  Data error in downloaded data via OTA (corrupted data).
E-15  Communication error via USB.
 
Strange Clock behaviour   
00:00  Time unknown. Toppy has been reset & needs to be turned On to correct.
*12:30     Memory corrupted. Requires a hard power-off reset.
 * Current Time displayed when Toppy is On - instead of P007, rECo or PLAY.
 
Normal Start Up messages   
RUN     Loading Auto Start TAPs. Press 0 when you see RUN to stop TAPs loading.
** L4:16     Firmware Loader version when booting.

              ** Varies depending on the Toppy Model, L4:06, L4:66, C1.01 etc.

 

Home    News       Copyright © 2005-2008 ToppyTools       Terms